The rear body panels are one of the few body panels that required no filling straightening or fettling. A good clean up with hot soapy water, rub back with wire wool and wet & dry, de-grease and paint…. and I didn’t take any pictures of that part.
A bit tired
Rubbed back and ready for a paint
Some small parts also needed painting
Repainted. Leave overnight and fit
Motley crew of fixings
New seals were required. But first a bead of Loctite gasket sealent
New seal pressed into place
Rear panel mounted and brackets being attached
New BSF stainless fixings all round
From the inside
From the outside
Little Green Landy 