With the roof, side panels, windscreen frame, doors, bulkhead, wings, radiator panel, rear tub, brake lines and seat box removed, the next step is removing the engine and gearbox.

img_0511
4 bolts hold the engine and gearbox in place.
img_0512
Straps in place and ready to lift
img_0513
The “engine steady” came free with the crane. Deigned to keep the weight of the engine balanced during lifting so the whole thing comes out vertically. Neat piece of kit.
img_0515
Not the easiest thing to shift about on block paving
img_0518
Definitely a day for steel capped boot
img_0520
Made it to the garage, (up the 1″ step at the threshold) where the engine and gearbox were then separated
img_0523
Not much left now
img_0522
Axles next… and then the real work starts